Products
Products
MM32F5230
- Overview
- Document
- Tools & Software
- Target Application
- Selection
- Product Information
Product Description
MM32F5230 MCU is equipped with Arm®v8-M architecture STAR-MC1 processor (compatible with Cortex-M33). It operates at a frequency of up to 120MHz, embeds 128KB Flash and 32KB SRAM, and integrates with rich I/O ports and peripheral modules, including ADC, DAC, analog comparator, advanced timer, general-purpose timer, basic timer and low-power timer as well as communication interfaces, such as I2C, SPI or I2S, UART, USB 2.0 full speed controller, FlexCAN interface.
- 120MHz Star-MC1 (compatible with M33) processor, and its performance per MHz is 20% higher than that of Cortex-M3 and Cortex-M4
- High storage ratio: 128KB Flash, 32KB SRAM, 4:1 Flash/RAM ratio
- Rich communication interfaces: up to 6-way UART, 4-way SPI (1-way USART supported) and 2-way I2C
- Configure USB interface and USB equips with independent clock
- Configure CAN2.0 interface, compatible with MindMotion’s F5 and F0140/60 series
- Two 12-bit ADC with speeds up to 3MSPS and one 12-bit DAC
- Two 16-bit Adv. Timer, six GP Timer and one LP Timer
- Operating voltage: 1.8V ~ 5.5V
- Most IO ports support 5V tolerance
- 40°C ∼ +105°C temperature range
- Provide LQFP64, LQFP48 and QFN32 package types
MM32F5230 has the following typical applications:
- Industrial control
- Home appliance control
- Home cleaning
- Consumer electronics
- Toys
- Automotive diagnostic instrument
- PC accessories
- Mini-LED
Product Features
Related Videos
-
No Details
Data Sheet
-
MM32F5230 Datasheet (Chinese)
Chinese 1.2 PDF 2.94MB 2024.08.27Description: Supports MM32F5230 series, provide detailed specifications, pin definition, electrical characteristics and packaging information.
-
MM32F5230 Datasheet (English)
English 1.1 PDF 5.40MB 2024.07.19Description: Supports MM32F5230 series, provide detailed specifications, pin definition, electrical characteristics and packaging information.
User Manual
-
MM32F5230 User Manual (Chinese)
Chinese 0.91 PDF 42.19MB 2024.11.27Description: Supports MM32F5230 series, providing a complete system architecture, memory and all peripheral details and register descriptions.
-
MM32F5230 User Manual (English)
English 0.91 PDF 30.06MB 2024.11.27Description: Supports MM32F5230 series, providing a complete system architecture, memory and all peripheral details and register descriptions.
Application Note
-
AN0006 programmer supported by third party (Chinese)
Chinese 2.4 PDF 2023.09.26Description: Third-party tools for programming MM32 products
-
AN0006 programmer supported by third party (English)
English 2.4 PDF 2023.09.26Description: Third-party tools for programming MM32 products
Lib Samples
-
MM32F5230 Lib Samples
English 0.10.2 ZIP 5.03MB 2024.09.20Description: Supports MM32F5230 and the Cortex-M Microcontroller Software Interface Standard (CMSIS), MM32 Standard Peripheral Library, IAR and MDK development, and offer rich reference samples for library function and register operations.
Recommended Tools
-
MiniBoard (MM32F5233D7PV)
On-board main control: MM32F5233D7PV
- 32bit Arm China STAR-MC1
- 128KB Flash, 32KB SRAM
- LQFP64On-board resources:
- 4 user LEDs
- 4 user press keys and 1 reset key
- 3 adjustable potentiometers
- PWM buzzer
- 8M SPI FLASH
- 2K EEPROM
- CAN transceiverOn-board interface:
- 2 x USB Type-C (USB-MCU和 USB-UART CH340)
- CAN connector
- CR1220 battery holder
- 20PIN SWD adjustable interface
- Arduino UNO compatible expansion connector
- MM32F5233D7P full-pin expansion connectorPower supply:
- USB TYPE-C -
MM32-LINK MINI Emulator
Support MM32 MCU SWD programming and debugging, compatible with CMSIS-DAP debugging channel
Support CDC virtual serial port, baud rate support 9600 / 14400 / 19200 / 28800 / 38400 / 56000 / 57600 / 115200 etc
Support firmware update and function configuration via U-Disk
Driver-free installation, supports Windows and Linux operating systems
Recommended Software
-
IAR Pack
When using IAR integrated development environment to develop MM32 microcontroller, you need to install this support package, so that you can select MM32 chip model, debug and download in IAR. -
KEIL Pack
When using KEIL integrated development environment to develop MM32 microcontroller, you need to install this support package, so that you can select MM32 chip model, debug and download in KEIL. -
J-Link Pack
When using J-Link debuggerto debug MM32 microcontroller or using J-Flash to make programming, this supportpackage needs to be installed to realize the selection of MM32 device in J-Flash; When J-Li...
Target Application
-
No Details
Selection
Buy
Part No.
Core
Max Speed (MHz)
Flash (KB)
RAM (KB)
Backup RAM(KB)
Ext. Bus I/F
I/O#
Security
32bit DIV
Advanced TMR
GP TMR
LP TMR
WDG
RTC
U(S)ART
LPUART
I²C
I³C
SPI
I²S
USB 2.0 FS
USB 2.0 HS
CAN 2.0B
Ethernet
SDIO
QSPI
ADC (1Msps, 12bit)
ADC (3Msps, 12bit)
DAC (12bit)
ACMP
OpAmp
Segment LCD
Pin Counts
Package
Package Size
Operation Temp
-
样片申请Agent Channel Link
- MM32F5233D4QV
- Star-MC1
- 120
- 128
- 32
- -
- -
- 28
- -
- -
- 2
- 6
- 1
- 2
- Y
- 4
- 1
- 1
- -
- 2
- 2
- D/H
- -
- 1
- -
- -
- -
- -
- 2, 10ch
- 1
- 2
- -
- -
- 32
- QFN
- 5x5
- -40~105C
-
样片申请Agent Channel Link
- MM32F5233D6PV
- Star-MC1
- 120
- 128
- 32
- -
- -
- 40
- -
- -
- 2
- 6
- 1
- 2
- Y
- 5
- 1
- 2
- -
- 3
- 3
- D/H
- -
- 1
- -
- -
- -
- -
- 2, 10ch
- 1
- 2
- -
- -
- 48
- LQFP
- 7x7
- -40~105C
-
样片申请Agent Channel Link
- MM32F5233D7PV
- Star-MC1
- 120
- 128
- 32
- -
- -
- 54
- -
- -
- 2
- 6
- 1
- 2
- Y
- 5
- 1
- 2
- -
- 3
- 3
- D/H
- -
- 1
- -
- -
- -
- -
- 2, 16ch
- 1
- 2
- -
- -
- 64
- LQFP
- 10x10
- -40~105C
You have not logged in yet, please log in and apply again, thank you!
Sample Application
We offer the following online ordering options
MM32F0010
Home > 产品 > MM32F > MM32F Value Line > MM32F0010
- Dealer
- Stock*
- Unit Price
- Quantity
- 1548
- $5.25
- 50
- Americas (inventory)
- EMEA(inventory)
- Asia(inventory)
- Japan(inventory)
- Dealer
- Stock*
- 1548
-
Order Now
- 1548
-
Order Now
- 1548
-
Order Now
- 1548
-
Order Now